The Connector Designer | Delta Electronics Mfg

Select from the available mounting types below to start assembling your custom N receptacle.
Then fill out the form and click the "Submit" button to send your RFQ.

Click the icon as applicable for a popup window with application information.
Note: Not all configurations will show all lettered dimension references shown in the form below.

Tab Contact: (Click here to close window)

Flat tab solderered to circuitry.

Slotted Contact: (Click here to close window)

Circuitry inserted into slot and soldered.

Post contact (Click here to close window)

Soldered to circuitry or inserted into socket contact.

Solder Pot Contact: (Click here to close window)

Wire soldered into hole in contact.

Grounding Lug: (Click here to close window)

Provides for termination of ground wire to body.

Isolated Ground: (Click here to close window)

These receptacles feature an additional insulator between the main connector body and the bodys mounting surfaces, electrically isolating the ground signal of the circuit from the panel. The circuit ground signal is passed through the panel via the solder lug for termination inside the equipment. Since they are not a triaxial connector design, isolated-ground receptacles can be used with any standard plugs.

A pressurized receptacle incorporates a flat rubber gasket under compression to provide an environmental seal when unmated. Pressurized receptacles are not gas-tight.

(Click here to close window)

A hermetically-sealed receptacle incorporates a glass-to-metal seal either soldered into the connector body or fused directly to the body (stainless-steel bodies only).

Hermetically-sealed connectors are waterproof and gas-tight.

(Click here to close window)

Enter the dimensions for each component below, along with your quantity requirements and contact information. Standard dimensions are in parentheses in the drawing above, where applicable. Using standard dimensions where possible will result in a more economical connector, particularly for small quantities.
Dimensions and Options:
Dimension A: ..	Dimension B: ..	Dimension C: ..
Dimension D: ..	Dimension E: ..	Dimension F: ..
Dimension G: ..	Dimension H: ..	Dimension J: ..
Dimension K: ..	Dimension L: ..	Dimension M: ..
Impedance: 50 ohm 70 ohm	Grounding Lug	Isolated Ground
Body material: Brass Stainless Steel	Body plating: Gold Nickel Silver Alballoy Passivated
Contact plating: Gold Silver	Pressurized --- Hermetic Seal
Other Requirements:
Request for Quotation and Contact Information (All fields below are mandatory):
Quantity (if more than one, separate with commas):		Delivery Time:
Name:	Company:	Address:
City:	State / Province:	Zip / Postcode:
Phone:	email: